After the manufacturer has been chosen, we will undertake an inspection on every batch of all materials and components to be used for your product. In this IPC, material, components and the first few finished units are checked at the commencement of productions against your specification and approval sample. The IPC thus permits timely correction and improvement before the bulk of production is initiated.
Product Components & Colours
Specifications & Dimensions
Branding & labeling
Packaging & Markings
The DPI provides the on-line inspection, DQC qualified inspectors will check that the corrections and improvements suggested during the IPC were implemented, examine the existing productions, advised the manufacturers of any further corrections or improvements to be made. The DUPRO should be carried out when manufacturers of any further corrections or improvements to be made. The DUPRO should be carried out when
The inspection covers the following:
Inspection Of Finished Product
Workmanship & Function Test
Labeling & Branding
Packaging & Carton Markings
Pre-Shipment Inspections are a most effective inspection that confirms the whole shipment's quality level. It normally requires the production to be 100% complete and at least 80% of goods to be packed into cartons. The normally requires the production to be 100% complete and at least 80% of goods to be packed into cartons. The checked samples are randomly selected according to AQL standard.
Each product is different and has a wide variety of defects that can occur. The inspections are performed using specific criteria based on each product’s style,function,specifications and other important information.
The below sections and points are covers in a PSI Inspection.
Quantity、Packing、Workmanship、Marking & Labeling
On-Site Tests、Client Special Requirement、Product Specification
The inspections and detailed/clear report formats will give you all the information that you need to make a final shipping decision.